Like us!


The LED Magician

The Simplest Way to Add Blinking/Chasing/Fading Effects to your LED Projects!

The LED Magician is a simple-to-use device yet packed with advanced features that will appeal to absolute beginners as well as professionals.

No programming, no complicated setups!

The LED Magician is an LED running light generator that is easy to install and use. It's tiny form factor and design is ideal for all LED related installations such as costumes, movie/stage props, RC toys, robotics or even lighting mods for your car or bike! This is the product that adds blinking/fading/chasing sequences to your otherwise boring LED lights! Works with any lightings within the range of 4.5v - 28v; with up to 500mA output across each of its 12 Channels. You can install up to 50 LEDs per channel or 100 LEDs per channel at 5mA each. It is also the ideal solution in driving LED Strips! 32 Pre-programmed blinking/chasing/fading/running modes with 8 variable speeds are controlled by 4 buttons on the circuit board. It also features 12 indicator LEDs that show a preview of the current running sequence and a smart microchip that "remembers" your last settings even after power-offs.

  For the absolute beginner, if you know how to use a soldering iron, you can start using the LED Magician! To put it simply, whatever power you use to supply to your LEDs, connect the power supply to the LED Magician, it distributes the power across 12 channels, adding selectable blinking sequences to them!

  Ideal for LED Costumes, LED Signages, Movie/Stage Props, Lightings for Cars/Bikes, RC Planes/Cars/Heli/Quadcopters/Multi-copters or Robotics Projects!

Includes simple instructions for the complete novice, as well as detailed information for the advance users. Including controlling of the light sequences with a micro-controller.


  •   Simplest way to add blinking/chasing/fading effects to your LED lightings!
  •   12 output channels!
  •   Input Voltage = Output Voltage
  •   Outputs of up to 500mA per channel!
  •   No Programming or any software required!
  •   32 Pre-programmed sequences, including blinking, chasing, fading effects & more!
  •   Includes a sequence that cycles through all 32 sequences!
  •   8 variable speeds!
  •   Control via 4 buttons on-board the module!
  •   Options to wire-out the controls, or control using a micro-controller! (Eg. Arduino etc.)
  •   Accepts a wide range of voltages ranging from 4.5v to 28v!
  •   Low power consumption!
  •   Indicator LEDs on-board show a preview of the current sequence!
  •   Small footprint ideal for LED costumes, LED Signage, Auto, RC or Robotic Projects!
  •   100% Surface-Mount Components
  •   “Remembers” your last setting even after power-off via non-volatile EEPROM chip
  •   Selectable input/output voltage range
  •   Dedicated output ports with common anode (Positive +)
  •   Application expands beyond LEDs; use it to control motors, switches, relays etc.
  •   Use it to drive relays for higher currents!

Technical Specifications
Technical Specification
Model no.: LED Magician Version 2
Weight: 10g (0.35oz)
Size (Dimension): 65mm(Length) x 40mm(Width) x 6mm(Max. Height)
Working Voltage: DC 4.5V - 28V (Min. 3V, Max. 30V)
Output Channels: 12 Channels
Output Voltage: </= Input Voltage
Output Current: Max 6A (500mA per channel)
Modes: 32 pre-programmed sequences, 8 variable speeds
Type: Common Anode
Controls: Via 4 x onboard push-buttons / TTL High/Low (via control output pins)
Power Consumption: Quiescent current - 6mA, With all indicator LEDs on -12mA
Working Temperature: -10 to 50°C
Indicator LEDs: 12 x BLUE SMD LED